Maintain your plumbing to reduce your water bill

In the home, a leak in the pipes can quickly increase your water bill! A dripping tap, poorly positioned connector, worn seal… You should know that 3m3 / month can easily make you lose between 35 m3 and 100 m3 / year. This is why regular maintenance of your plumbing allows you to limit this risk. By having your appliances serviced regularly, you limit leaks while saving on your water bill.

Need an emergency plumber?

Another plumbing tip to save on your water bill is to install a flow limiter. Otherwise known as a regulator, it is an inexpensive and very practical accessory for everyday use. You can attach it to the outlet of a shower hose or a faucet.

Its purpose is to limit the initial flow, whatever the pressure. Knowing that on average, a standard tap flows between 10 and 12 l per minute. Thanks to this equipment, you can therefore save up to 60% on water by regulating ifferent points of use.

Reduce the volume of the flush

If there is one place in the house where water is thrown into the trash, it is the toilet! On average, you should know that a flush generates between 7 and 10 l, which is still much more than your real needs. To overcome this problem, it is possible to opt for tanks with limited capacity or a flush equipped with two buttons for custom use. With the first button, you only pour 5 l of water while with the second, it will be 9 l of water. In addition, the pressure will be much less powerful for an equally effective result.

Invest in a shower with a pressure limiter

Another plumbing tip to save money on your water bill is to install an economical shower with a pressure limiter. On average, you should know that a shower uses between 12 and 26 liters of water per minute. After 10 minutes of showering, you will have used 260 liters of water…

So to bet on an economical solution without neglecting the hygiene of life, it is possible to opt for a pressure limiter. Thanks to this economical shower head, you will be able to save up to 50% to 70% of water on your bill.

Investing in high-performance devices

Finally, in the plumbing tips section to save on water, you should also look at household appliances. Washing machines or dishwashers, they consume a cycle of 30 l of water compared to 10 l for new generation household appliances rated A+++. You even have the option of opting for an eco mode and half load depending on the dishes to be washed. This allows you to reduce the amount of your bill while adopting the right actions on a daily basis.

If there is one place in the house where water is thrown into the trash, it is the toilet! On average, you should know that a flush generates between 7 and 10 l, which is still much more than your real needs. To overcome this problem, it is possible to opt for tanks with limited capacity or a flush equipped with two buttons for custom use. With the first button, you only pour 5 l of water while with the second, it will be 9 l of water. In addition, the pressure will be much less powerful for an equally effective result.